3-Level Hybrid System

  1. Active Ingredients
  2. Applications:

Level 1: Straightening treatment
Level 2: Gloss Effect
Level 3: Antifrizz Control

3-Level Hybrid System is a straightening cream that acts as a 3-level system to provide multiple transformation solutions to the hair.

Level 1 acts as a straightening treatment; Level 2 has a Gloss Effect to provide combability and intense shine to the hair; Level 3 controls frizz in wavy and curly hair.

Designed with the revolutionary aminoplasma technology, its formula includes vegetable proteins and organic acids, phytochemicals with great antioxidant power that prevent the breaking of sulfur bridges, modifying the fiber structure without breaking it.

Advantages of using 3-Level Hybrid System

  • With thermal protectors that help improve the protection and care of the hair.
  • Extremely careful and gentle for all hair types, including naturally curly and wavy.
  • Straightening with lasting effects from 3 to 6 months.
  • Extraordinary shine.
  • Maintains the volume and natural “look” of the hair.
  • Ultra silky hair, loose, light and without weighing it down.
  • Repairing and nourishing action.

ACTIVE INGREDIENTS

AMINOPLASMA TECHNOLOGY

Its composition is based on high, medium and low molecular weight proteins, polypeptides and amino acids which have a great restorative effect at all levels of the hair fibre: cuticle, cortex and medulla.

Aminoplasma characteristics

  • Filmogenic: seals the cuticle and regulates porosity.
  • Protective: protects against chemical bleaching and color treatments; physical treatments such as brushing or friction; and thermal protection from the heat of straighteners, hair dryers, etc.
  • Conditioning action
  • Hair restructuring

Organic Acids: Phytochemicals with great antioxidant power that prevent the breaking of sulfur bridges in the straightening treatment, modifying the fiber structure without breaking it.

Beta-glucans: They are carbohydrates that stand out for their high hydration and vitamin content.

APPLICATIONS

1 | LEVEL 1: STRAIGHTENING TREATMENT

Diagnosis

Before starting the application, it is important to carry out a complete diagnosis of the hair and make sure of its general condition, how damaged it is and its porosity.

This straightening treatment can be done on colored and bleached hair.

In the case of also carrying out a coloring, bleaching or tint treatment, it is better to do the smoothing treatment first.

Keep in mind that the 3-Level Hybrid System treatment can lighten recently dyed hair between 2 and 3 shades.

Preparation of the hair for the straightening treatment

WASHING

Wash the hair with Detox Shampoo 2 times to achieve a deep clean, free of residues caused by silicones, environmental factors and other hair products:

1st time– apply the shampoo, gently massage the hair and rinse with water.

2nd time – Immediately after the first application, apply the shampoo, gently massage the hair, leave it on for 5-10 minutes (not less than 5 minutes). Rinse with water without using any type of conditioner, mask or balm.

It is important NOT to rub the scalp during washes.

DRYING

Dry the hair (between 80 and 100%) with the dryer. The more curly the hair, the drier it needs to be. For afro-type hair, it is very important that it is 100% dry. Dry all the hair equally, so that moisture does not accumulate at the ends.

APPLICATION

Important: Shake the bottle well before applying the product

Application:

Divide the hair into 4 sections. Start the application, by strands, from the nape of the neck. We distribute the product from the roots, passing along the length of the lock, until reaching the ends, emulsifying the product in the hair to form a foam and working with the fingers for a better penetration of the product.

The product can be applied with the brush or applicator. Gently distribute the product on the roots. If there are areas with very strong curls, start working on them.

Product Quantity:

  • More product – improves the results and effectiveness of the treatment.
  • Less product – reduces the intensity of treatment effects.

Product average consumption:

Sizes

Thin

Thick

Short / Shorter than medium hair

40 ml

50 ml

Medium / long

50 ml

70 ml

Extra long

60 ml

80 ml

Exposure time

Count from the application to the last strand of hair. Estimated time: 30-60 minutes depending on the type of curl. In afro and ethnic type hair: 60 minutes. It is recommended to use dry heat – climate (no fan, do not cover the hair, do not use clips or hairpins, do not lift the hair), this will speed up and improve the result.

Once the exposure time has elapsed, rinse the hair with lukewarm water without using shampoo. Very important: do not use shampoo at this stage, as this would end the chemical process in the hair and would not allow the straightening process to finish. Check that there are no traces of product on the hair.

To be sure, after rinsing, the hair should be shiny; if the hair is opaque (matt) it means that the hair is not completely clean and it is necessary to rinse it again with water. Another indicator is a bad smell when working with the hair straightener.

Hair straightening

We dry the hair 100%, with a hot hair dryer. It is necessary to direct the hair dryer from top to bottom, from the crown to the ends of the hair, helping to smooth it with your fingers.

Divide the hair into 4 parts.

Start with the lower occipital area to work with the hair straightener lock by lock. The thickness of each strand must be between 0.5 and 1 mm, depending on the thickness of the hair: the strand must be transparent in the hand. It is important to choose the right thickness of the strand to obtain the best results.

Start working with the hair straightener at 230º from the roots:

Iron the hair of 5 cm 3 times from the roots to the ends.

Iron the hair 7 times, along the entire strand to the ends, with medium speed (5 times on very porous hair; 10 times on afro hair at a slower speed).

The angle of the lock must be 90 degrees. When working the area of the hair around the face, it is necessary to direct the strands forward (towards the opposite side of the head) to smooth the root area well.

Important:

DO NOT decrease the pressure during the entire ironing of the hair straightener. Keep it stable and uniform from root to tip.

Treatment result verification

After the straightening treatment, wet the hair with lukewarm water, without using any shampoo or conditioner. Dry the hair with a hair dryer in an up-down direction, helped with your fingers without using a brush. If a curl appears, it means that this lock was not straightened correctly, it must be ironed again. There is no need to reapply 3-Level Hybrid System. If the hair is smooth and shiny, the application process has been completed successfully.

Perfect Finish

For a perfect finish, and incredible results for your clients, we recommend combining it with the Pro Miracle Deep Repair treatment.

Postreatment

Recommend to your clients the post-treatment routine with the Hydration Shampoo, Fabulous Leave-in Mask and Full Nourishment Hair Mask, ideal for maintaining a perfect and long-lasting result of straightening, prolonging its shine and smoothness. So your client will have radiant hair for longer.

2 | LEVEL 2: GLOSS EFFECT

Hair preparation for Gloss Effect

Washing

Wash the hair with Detox Shampoo 2 times to achieve a deep clean, free of residues caused by silicones, environmental factors and other hair products:

1st time– apply the shampoo, gently massage the hair and rinse with water.

2nd time – Immediately after the first application, apply the shampoo, gently massage the hair, leave it on for 5-10 minutes (not less than 5 minutes). Rinse with water without using any type of conditioner, mask or balm.

It is important NOT to rub the scalp during washes.

Drying

Dry the hair (100%) with the hair dryer.

3-Level Hybrid System Application

Important: Shake the bottle well before applying the product

Application

Divide the hair into 4 sections. Begin the application by sections from the nape of the neck. We distribute the product from the roots, passing along the length of the lock, until reaching the ends, emulsifying the product in the hair to form a foam and working with the fingers for a better penetration of the product. The product can be applied with the brush or applicator. Gently distribute the product on the roots.

Keep in mind that this product opens the curl, rearranges the cuticle and allows greater refraction of light, thus increasing the shine of the hair.

Exposure Time

Count from the application to the last strand of hair.

Estimated time: 30 minutes.

Once the exposure time has elapsed, rinse the hair with lukewarm water without using shampoo. Very important: do not use shampoo at this stage, as this would end the chemical process in the hair and would not allow the straightening process to finish. Make sure that there are no traces of the product on the hair. To be sure, after rinsing, the hair should be shiny; if the hair is opaque (matt), it means that the hair is not completely clean, and it is necessary to rinse it again thoroughly with water.

Drying

Dry the hair with the usual blow-drying (100%) with the hair dryer.

3 | LEVEL 3: ANTIFRIZZ CONTROL

Control Antifrizz​ Control Hair preparation

Washing

Wash the hair with Detox Shampoo 2 times to achieve a deep clean, free of residues caused by silicones, environmental factors and other hair products:

1st time– apply the shampoo, gently massage the hair and rinse with water.

2nd time – Immediately after the first application, apply the shampoo, gently massage the hair, leave it on for 5-10 minutes (not less than 5 minutes). Rinse with water without using any type of conditioner, mask or balm.

It is important NOT to rub the scalp during washes.

Drying

Dry the hair (100%) with the hair dryer.

3-Level Hybrid System Application

Application

Divide the hair into 4 sections. Begin the application by sections from the nape of the neck. We distribute the product from the roots, passing along the length of the lock, until reaching the ends, emulsifying the product in the hair to form a foam and working with the fingers for a better penetration of the product. The product can be applied with the brush or applicator. Gently distribute the product on the roots.

Exposure Time

Count from the application to the last strand of hair.

Estimated Time: 40 minutes.

Once the exposure time has elapsed, rinse the hair with lukewarm water without using shampoo. Very important: do not use shampoo at this stage, as this would end the chemical process in the hair and would not allow the straightening process to finish. Make sure that there are no traces of the product on the hair. To be sure, after rinsing, the hair should be shiny; if the hair is opaque (matt), it means that the hair is not completely clean, and it is necessary to rinse it again thoroughly with water.

Drying

For thin/medium and/or wavy hair: use the brushing technique, 15 passes for each strand.

For thick hair: use a hair straightener at 210ºC with thick locks and make 5-7 passes per lock

WARNINGS

  • Keep out of the reach of children, light and heat.
  • Do not apply to the scalp if it is irritated.
  • In case of irritation, stop the application immediately and contact a specialist.
  • Avoid contact with eyes.
  • If the product gets into the eyes, rinse immediately with water.
  • Wear suitable gloves.